How Can We Help?

Table of Contents
< All Topics
Print

This is a generic datasheet showing the common functionality of our UI Tiles that provide a Lock or Door function. All of the control functions are common to the whole range of these UI Tiles. This datasheet uses the Lock as an example of this functionality.

Find all Locks and Door Ui Tiles in the following category:
Door Access ->> Various 

Room Page Tile

The room page tile is the main entry point to the driver. Pressing on the tile will toggle the lock state. The lock will latch open unless auto-lock is enabled where it will lock after the preset auto-lock delay.

Home Page Tile Actions

The home page navigates you straight to the user interface of the driver.

Driver User Interface

  • Manual Control
    • Lock
    • Unlock (this is still affected by auto-lock if enabled)
    • Activity Feed (shows information about recent actions)
  • Driver Settings
    • Launch Settings (password protected)

Driver Specific Settings

  • Auto Lock
    • Enable
    • Disable
    • Time (in seconds, min 10 – max 600)
  • Open Close Delay
    • Time (in seconds, min 2 – max 10)
    • This defines how long the Lock or door takes to close and open.
  • Display on home page (tick box)
    • Enable
    • Disable
  • Licence
    • Launch Licence Settings

Actions and Events

These drivers feature a range of Actions and Events to allow you to connect up to hardware or other drivers.

The Events you need to use will be highly dependant on your required hardware setup.

SettingsParameterValueParameter 2ValueDescription
Auto CloseSwitchWhen the Auto Close feature is turned on the driver fires the Do Close Door event after the door has been open for the duration set in Auto Close Time
Auto Close TimeSecondsThe duration to leave the door open before sending the Do Close Door event if the Auto Close feature is turned on
Set Time For Open and Close FunctionSecondsUsually used with motorised gates and doors, this is the duration to show the door as opening or closing
Display on home pageCheckbox
Settings Password ControlCheckbox
ActionsParameterValueParameter 2ValueDescription
CloseTriggers the Do Close Door event and shows the door as closed
Close With DelayDelay (s)0 - 600 secondsWaits for the delay time then triggers the Do Close Door event and shows the door as closed
Disable Auto CloseTurns off the Auto Close feature
Door Closed SensorChanges the door state to Closed. If the previous door state was Door Opened (forced) then the Do Close Door event will also be triggered
Door Open SensorChanges the door state to Door Opened (forced) if the previous door state was closed
Enable Auto CloseTurns on the Auto Close feature
OpenTriggers the Do Open Door event and shows the door as open
Open Door With Auto RelockAuto Close Time (s)0 - 600 secondsTriggers the Do Open Door event and shows the door as open. Waits for the delay time then triggers the Do Close Door event and shows the door as closed. Note: This action is separate to the Auto Close Feature
Set Auto Close TimeAuto Close Time (s)0 - 600 secondsSets the duration to leave the door open before sending the Do Close Door event if the Auto Close feature is turned on
EventsParameterValueParameter 2ValueDescription
Do Close DoorThis event fires whenever the door is set to the closed state from the user interface, the close door actions or the auto close feature
Do Open DoorThis event fires whenever the door is set to the open state from the user interface or the open door actions
Close Button PressedThis event fires whenever the close button is pressed on the user interface
Open Button PressedThis event fires whenever the open button is pressed on the user interface
Tile Button PressedThis event fires whenever the room tile is pressed on the user interface
Normal Events
EventLocked / ClosedEvent fires when state is updated to locked / closed
EventUnlocked / OpenedEvent fires when state is updated to Unlocked / Opened
Button Presses
EventLock/Close Button PressedEvent triggered when any command button is pressed
e.g. Tile button, Lock Button , Open Button
( Use this event to trigger a momentary release)
EventUnLock/Open Button PressedUse to trigger a momentary release.
EventTile Button PressedSuggested use: Use to trigger a momentary release.
NB: The UITile State will toggle.
Control Sensor Actions
ActionControl Sensor OpenedIf Locked the this causes the UI to show a “forced open” message
ActionControl Sensor ClosedIf the previous state (before a forced open) was Locked then the
door sensor closing will cause the Lock state to be changed to locked
NB: A Locked / Closed Event will be triggered.
Function ActionsNB: All Function Actions will trigger Normal Events above
ActionUnlock / OpenUnlock / Close from an Action
ActionLock / CloseLock / Open from an Action
ActionUnlock / Open
with Auto Re-lock /Re-Close
This Action allows the installer to set a custom delay before relocking
/ reclosing
Configure Settings Actions
Action Disable Auto Lock / CloseDisable the Auto Lock / Close Feature
ActionEnable Auto Lock / CloseEnable the Auto Lock / Close Feature

Common Settings

Display On Home Page

Licence Settings

Select currency
GBP Pound sterling