How Can We Help?

ATEN PDU – User Manual

You are here:
< All Topics

Room Page Tile

The room page tile is the main entry point to the driver. The Home page and Room Tiles allow the user to access the driver user interface.

Home Page Tile Actions

The home page navigates you straight to the user interface of the driver.

Driver User Interface

  • Output Selection
    • Launch Output Selection page
    • NB: If all outlets are hidden then the Output Selection button is also hidden. (however if this is the case we would recommend putting the driver in a hidden room.
  • Driver Settings
    • Launch Settings (password protected)

Output Selection

Select the Outlet you wish to control. This will present a new page to control the respective outlet.

NB: Using the Settings pages you can decide which of the PDU outlets to show and hide in this list.

That way you can select a small subset of pdu outlets to leave visible to your users.

Outlet Control

  • Output Controls
    • Outlet On
    • Outlet Off
    • Outlet Reset
  • Outlet Status
    • Current Status (On or Off)
    • Voltage Level
    • Amperage Level

Driver Specific Settings

  • Output Selection (Settings See Below)
  • All Outputs On ( user must confirm action)
  • All Outputs Off ( user must confirm action)

Common Settings

Display On Home Page

Licence Settings

Hardware Settings

Output Selection (Settings)

Select the Outlet you wish to control. This will present a new page to control the respective outlet.

NB: In this settings list all outlets are always displayed.

Outlet Control (Settings)

  • Output Controls
    • Outlet On
    • Outlet Off
    • Outlet Reset
  • Outlet Status
    • Current Status (On or Off)
    • Voltage Level
    • Current Level

  • Outlet Set Name
  • Display Outlet on Public View
    • When the checkbox is unchecked this outlet will no longer be visible in the (non password protected) output Selection page.

Hardware Setup

Aten Setup via Web Browser

  • Enable Telnet Server
  • Set Name:
  • Set Password
  • Save

Compatibility List

Note1 : only PE6/8/9 has outlets switching capability and are hence compatible.

Note2: please make sure to use latest firmware (below is the minimum requirements)

Note3: All Driver Testing has been on a PE8324G

Previous 2N DoorStation – User Manual
Next Door and Lock – User Manual
Table of Contents
Select currency
USD United States (US) dollar